Selection points of two-dimensional motion mixer

Choose a two-dimensional motion mixer according to the daily production situation. Since the processing time of each batch of materials in the high-speed mixer is about 10 minutes, plus the time of discharging and feeding, the processing time of each batch of materials can be counted as 15 minutes, so four batches of materials can be processed continuously within one hour. If you choose a two-dimensional motion mixer with a processing capacity of 100 kg per batch, it can process 400 kg per hour. Users can choose the two-dimensional motion mixer according to their own needs. According to the working principle of the two-dimensional motion mixer, the ability of the double-helix belt stirring and mixing to push materials in opposite directions should be basically the same. Because the pitch of the inner helical belt is smaller than that of the outer helical belt, in order to achieve the same pushing capacity, the pitch of the inner helical belt should be smaller than that of the outer helical belt, but the width should be larger than that of the outer helical belt, otherwise the material will concentrate in one direction. Therefore, pay attention to this when choosing a horizontal high-speed mixer. According to the design principle, the gap between the spiral belt and the shell in the two-dimensional motion mixer can be 4 mm to 10 mm, and all materials can participate in the mixing through friction drive. However, due to the different particle sizes and friction coefficients of the materials, the mixing time of the materials of various components will also be different, resulting in uneven products. At present, some manufacturers have realized this and improved their mixer products. One is to pay attention to the machining accuracy and reduce the bottom gap to about 3 mm; the other is to make the position between the main shaft and the shell adjustable, and the gap between the spiral belt and the shell can be adjusted frequently according to the amount of wear. When choosing a high-speed mixer, these two types of products should be good choices. The two-dimensional motion mixer is the heart of the mixing process. In order to improve the mixing speed and the automation process of mixing, the two-dimensional motion mixer needs to be equipped with other auxiliary equipment to meet the overall mixing process. Conventional mechanical mixing equipment works intermittently, and a single batch of materials that need to be mixed needs to be prepared to be added to the mixer for mixing and uniform discharge. (1) Feeding equipment In order to improve the time of intermittent stirring operation, it is necessary to quickly add the prepared mixed materials into the mixer every time. In order to prepare the materials to be mixed each time, manual batching or automatic batching can be designed. (2) Feeding equipment. According to different forms and processes, the two-dimensional motion mixer discharges in different ways. However, no matter which form it is, the mixed material needs to be put into the warehouse or other equipment for the next process. According to different operation requirements, there are different options for the mixed flow valve of the two-dimensional motion mixer: 1. According to the type of discharge valve, there are gate valve, butterfly valve, ball valve, rotary valve, gate valve, top valve and arc valve. 2. According to the operation mode, the discharge valve is controlled by manual, electric and pneumatic.