FC-B new dust-free high-efficiency pulverizer

working principle

1. The motor rotates the main shaft through the belt drive, and the crushed material enters the pulverizer cavity from the feed port, and the material collides and rubs in the high-speed rotating air flow, and is crushed in the gap between the cutter head, the screen, the grinding block, and the crushing knife. The materials that reach a certain fineness flow out of the hopper through the screen, and the materials that do not reach the mesh number of the screen are repeatedly crushed and impacted until the materials are crushed to a certain fineness, so that the particles are relatively uniform and The particle size distribution range is small.

2. During the crushing process of the material, due to the high speed of the motor, the material is driven to rotate at a high speed in the machine cavity, forming an air flow, which takes the heat generated by the material and friction out of the machine cavity. The shell and bearing seat are equipped with water jackets, which can circulate different cold coal water and have a cooling effect.

3. This machine is a manufacturer that meets the requirements of GMP certification. It provides a dust collection device. Its working principle is that the dust discharged from the pulverizer chamber is absorbed into the filter bag that meets GMP, and is manually or automatically beaten to make the dust in the dust. The dust around the filter cloth is shaken into the collecting bucket, so that the material can be fully utilized and the loss can be reduced.

Technical Parameters